Fire alarms for warehouses, factories and industrial units
Fire detection designed for high roofs, racking, dust, cold stores and shift work, installed and serviced by our own experienced engineers. We're SAFE Fire & Security Systems, based in Halesowen, and we install, upgrade and maintain fire alarm systems for warehouses, distribution centres, factories and industrial units across the West Midlands.
- Free site survey, no obligation
- BAFE and NSI approved, designed to BS 5839-1
- Our own experienced engineers
- Work planned around your shifts, deliveries and production
Accredited & approved
★★★★★5.0 from 46 Google reviewsWhy industrial buildings need a different approach
A warehouse or factory isn't an office with a bigger roof. These are the problems we're asked to sort most often on industrial sites:
- Smoke detectors that can't be reached for testing because they sit high up in the roof, above racking.
- False alarms from dust, steam, fumes or forklift exhaust that stop production and frustrate staff.
- Cold stores, freezers and plant rooms where ordinary detectors aren't suitable.
- An older system that nobody will touch because it's closed protocol and the original installer has gone.
- A site that has grown, with new units, mezzanines or racking that the fire alarm was never extended to cover.
- No chance of shutting down, because the site works long shifts and deliveries never stop.
Every one of these can be fixed with the right design. That starts with a free site survey.
Fire alarm systems we install in warehouses and factories
We design each system around your fire risk assessment and BS 5839-1, the code of practice for fire alarms in non-domestic buildings.
Optical beam detection for high roofs
Beam detectors send an infrared beam across the space and raise the alarm when smoke blocks it. One beam can cover a large open area, and the units sit on the walls rather than up in the roof, so they're easier to reach and test. At a distribution centre in Corby we fitted 18 fire beams as part of a full upgrade.
Aspirating smoke detection
Aspirating systems draw air back through a network of small pipes to a sensitive detector unit. They suit high-bay warehouses, cold stores and areas where detectors need to be kept out of reach or out of harm's way, and testing is done at the detector unit rather than at height.
Addressable systems for large and complex sites
Every detector, call point and sounder has its own address, so the panel shows exactly where an alarm or fault is. On big sites, several panels can be networked together. In Corby we installed a three-panel networked Advanced fire alarm system across the facility.
Two-wire conventional systems for smaller sites
For smaller units and simpler buildings, a two-wire conventional system puts detectors, call points and sounders on one pair of wires per zone, so there's far less cabling to run through a working site. That's what we fitted at Bennetts Ice Cream's food factory in Worcester.
Detection that suits each area
Heat detectors where dust, steam or fumes would set off smoke detectors, detection chosen for freezers and cold stores, and manual call points by every exit. We plan it room by room, so it works for how each area is actually used.

Installing without stopping your site
Most of the industrial sites we work on can't close. So we plan the work with you before we start:
- We work with your on-site engineering and health and safety teams.
- Noisy or disruptive work can be done out of hours or during agreed shutdowns.
- Where a system is being replaced, we can install the new one alongside the old one, so the building is never left without fire cover.
- We programme the cause and effect to suit your site, for example so weekly tests can be done by isolating one area at a time.
That's exactly how we upgraded a busy distribution centre in Corby, which stayed open throughout.

Recent industrial projects
Distribution centre, Corby: full fire alarm upgrade
The client needed a modern, compliant system to support the site's expansion, without interrupting operations. Our team removed the old closed-protocol system and installed a three-panel networked Advanced open-protocol system with 18 fire beams, smoke detection and manual call points across the facility. The new system ran in parallel with the old one during the changeover, and the work was done out of hours and during pre-approved shutdowns. Corby is outside the West Midlands, but we plan every busy site the same way.
Read the Corby distribution centre case study
Bennetts Ice Cream, Worcester: food factory, warehouse and office
Our own engineers installed a C-TEC AlarmSense two-wire system across the ice cream factory, distribution warehouse and office at Manor Farm, Lower Wick. Detection had to suit freezers, cold stores and plant, and the work had to fit around a busy food business. Bennetts now have their fire alarm serviced by us every six months.
"I could really tell your guys really care about the work they do and are very professional & approachable. Top job." Commercial Operations Manager, Bennetts Ice Cream
Taking over an existing system
You don't always need a new fire alarm. Our own experienced engineers work on both open and closed protocol fire alarm systems, so whichever type your site has, we can service, maintain and extend it. If the system really is at the end of its life, we'll tell you plainly and show you the options. Read more in our guide to open protocol vs closed protocol fire alarms.
Servicing and maintenance
BS 5839-1 recommends a professional inspection and service at least every six months, plus a weekly test of a call point that you or your staff can do. On a large site we plan the visits so every device is covered over the year, and every visit is recorded so you always know where you stand. Our maintenance customers can see their certificates and visit reports in the customer portal. See our guide on how often fire alarms should be tested.
Your duties as the responsible person
Under the Regulatory Reform (Fire Safety) Order 2005, the person in control of the premises must make sure there's a suitable fire risk assessment and that fire safety systems are maintained. For fire risk assessments, we partner with select, highly experienced fire risk assessors we know and trust, and their findings feed straight into the fire alarm design. For the wider picture, read fire safety in the workplace.
One team for the whole site
The same team can look after your emergency lighting, fire extinguishers, CCTV, intruder alarms, access control, LED lighting upgrades and electrical testing. One company, one contact and one set of records.
Areas we cover
From our base on Shelah Road in Halesowen we cover industrial estates and business parks across Birmingham, the Black Country (Dudley, Stourbridge, Walsall and Wolverhampton), Worcestershire, Warwickshire, Staffordshire and Shropshire. See our commercial fire alarm installation page for the full list of areas.
Warehouse and industrial fire alarms: your questions answered
What type of fire alarm does a warehouse need?
How do you stop false alarms in a factory?
Can you install a fire alarm without shutting down our site?
How are detectors tested when they're high above racking?
Can you take over a fire alarm another company fitted?
How often should an industrial fire alarm be serviced?
Do you cover our area?
Talk to a local team that knows industrial sites
Book a free site survey. It's a short, non-invasive visit. We'll see what your site needs, guide you to a compliant solution and give you costs. No obligation and no hard sell.
SAFE Fire & Security Systems Ltd, La Husbands, Shelah Road, Halesowen, West Midlands, B63 3PP · Office open Monday to Friday, 8:30am to 5pm. Breakdown cover on maintenance contracts.




